The application of interdisciplinary and cross-grade learning teaching method in stomatology course.

OBJECTIVES: The first purpose of this project was to determine whether an interdisciplinary and cross-grade teaching model impacts students' learning enthusiasm and their views on this teaching method. The second purpose was to determine whether the model positively impacted students' theoretical course exam scores. METHODS: We recruited 203 pre-clinical undergraduate dental students, including 104 third- and 99 fourth-grade students. The study was conducted in experimental classes for the "Dental Materials" course in the third-grade program (focusing on cement material mixing techniques) and the "Endodontics Practice" course in the fourth-grade program (focusing on the preparation and filling of Class II cavities). The interventions were implemented before, during, and after the class. We assessed students' attitudes toward this teaching method and changes in their course scores. RESULTS: The survey questionnaire assessed the students' levels of learning enthusiasm, professional competence, and classroom effectiveness, all of which demonstrated significant improvement. The average scores for lab operations, quizzes, and usual performance exhibited a substantial increase (p < 0.001). The average score of the final examination increased from 75.61 to 78.17 (p = 0.008). CONCLUSIONS: Significant enhancement in students' learning attitudes, course scores, collaborative abilities, and innovation capacities were observed following the interdisciplinary and cross-grade teaching method. Furthermore, the overall classroom efficiency improved. This teaching method can expand the scope of future research.

Are we practising what we preach and are we all singing from the same hymn sheet? An exploration of teaching in paediatric caries management across UK dental schools.

BACKGROUND: The evidence underpinning caries management for children has progressed dramatically over the past 20 years. Anecdotally, this is not reflected in the teaching provided to undergraduate dental students, with the ongoing teaching of outdated methods within some dental schools. AIM: To capture the current undergraduate teaching provision and clinical treatment experience requirement relative to caries management in paediatric dentistry in UK dental schools. DESIGN: Cross-sectional analysis of current teaching methods on paediatric caries management was obtained using a piloted online data collection form. Question content included current caries teaching methods, assessment of student exposure and competence. The results were analysed descriptively. RESULTS: Of the 16 UK dental schools, 14 participated. Discrepancy in teaching content was apparent. Many schools (n = 9) taught biological caries management through therapeutic fissure sealants, yet this was not reflected in assessment and clinical requirements. Some schools (n = 4) taught amalgam placement in children, and most (n = 12) operatively taught treatments that would no longer be routinely provided in general dental practice in the UK, including primary tooth pulpotomy. CONCLUSION: There is substantial variation in the paediatric caries management techniques that are taught across UK dental schools, demonstrating a need for a national consensus to address these disparities.

Assessment of Knowledge, Attitude, and Practice of Pharmacovigilance and Materiovigilance among Oral Health Practitioners in India.

Aim: This electronic survey was carried out to assess the knowledge, attitude, and practices among the oral health practitioners. Methods: A questionnaire survey was conducted among undergraduates, graduated practitioners, and specialist practitioners. A Google Form that included a specified instruction format, informed consent with a clear description of the purpose of the study, and questions in different categories were sent through Whatsapp and email. Descriptive statistics were used to analyze responses. The association of knowledge and attitude with respect to oral health professionals was analyzed with the Chi-square test. Results: The questionnaire was completed by 570 participants. Thirty percent of participants encountered ADR related to the drugs available in the market and 33.2% of participants encountered adverse reaction related to materials used in practice. ADR should be reported as soon as it is detected, according to this study about 12.1% of participants reported the ADRs, and this reporting is primarily for patient safety. Almost 66.8% of participants perceived that dental products can cause ADR owing to a lack of information about ADR and reporting procedures, or due to fear of legal concerns. Only about 9.5% of the participants had previously attended an ADR workshop. Conclusion: Oral health practitioners have a general understanding of ADR; however, there is substantial evidence of underreporting and a lack of reporting system information. Organizing an orientation program and raising awareness about ADR reporting could help improve spontaneous reporting and better patient care.

Effect of Staining Beverages on Color Stability of Composite: A Spectrophotometric Study.

Objective: This study used spectrophotometry to examine how staining beverages affect the color stability of three commercial composite materials (nanohybrid composite (A), bulk fill composite (B), and flowable composite (C)) over time. Materials and Methods: Composite discs were randomly divided into groups. The specimens were kept in coffee, tea, red wine, and cola for 14 days at 37°C in the dark. At baseline, 7 days, and 14 days, spectrophotometers measured color. Calculated and analyzed color differences (E). Results: Staining beverages changed the color of all composites. Composite material A had the best color stability, whereas material C stained beverages the most. Red wine and coffee discolored composites most. Discoloration increased over the 14-day immersion period. Conclusion: Composite materials with better color stability were material A. Red wine and coffee discolored composites most. When choosing restorative materials, dentists should consider composite materials' color stability for long-lasting, visually acceptable results.

Biofilm Formation on Hybrid, Resin-Based CAD/CAM Materials for Indirect Restorations: A Comprehensive Review.

Hybrid materials are a recent addition in the field of restorative dentistry for computer-aided design/computer-aided manufacturing (CAD/CAM) indirect restorations. The long-term clinical success of modern dental restorative materials is influenced by multiple factors. Among the characteristics affecting the longevity of a restoration, the mechanical properties and physicοchemical interactions are of utmost importance. While numerous researchers constantly evaluate mechanical properties, the biological background of resin-based CAD/CAM biomaterials is scarcely investigated and, therefore, less described in the literature. This review aims to analyze biofilm formation on the surfaces of novel, hybrid, resin-based CAD/CAM materials and evaluate the methodological protocols followed to assess microbial growth. It is demonstrated that the surface structure, the composition and the finishing and polishing procedures on the surface of a dental restorative material influence initial bacterial adhesion; however, most studies focus on in vitro protocols, and in vivo and/or in situ research of microbiomics in CAD/CAM restorative materials is lacking, obstructing an accurate understanding of the bioadhesion phenomenon in the oral cavity.

Characterization of Microstructure, Optical Properties, and Mechanical Behavior of a Temporary 3D Printing Resin: Impact of Post-Curing Time.

The present study aimed to characterize the microstructure of a temporary 3D printing polymer-based composite material (Resilab Temp), evaluating its optical properties and mechanical behavior according to different post-curing times. For the analysis of the surface microstructure and establishment of the best printing pattern, samples in bar format following ISO 4049 (25 × 10 × 3 mm) were designed in CAD software (Rhinoceros 6.0), printed on a W3D printer (Wilcos), and light-cured in Anycubic Photon for different lengths of time (no post-curing, 16 min, 32 min, and 60 min). For the structural characterization, analyses were carried out using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The mechanical behavior of this polymer-based composite material was determined based on flexural strength tests and Knoop microhardness. Color and translucency analysis were performed using a spectrophotometer (VITA Easy Shade Advanced 4.0), which was then evaluated in CIELab, using gray, black, and white backgrounds. All analyses were performed immediately after making the samples and repeated after thermal aging over two thousand cycles (5-55 °C). The results obtained were statistically analyzed with a significance level of 5%. FT-IR analysis showed about a 46% degree of conversion on the surface and 37% in the center of the resin sample. The flexural strength was higher for the groups polymerized for 32 min and 1 h, while the Knoop microhardness did not show a statistical difference between the groups. Color and translucency analysis also did not show statistical differences between groups. According to all of the analyses carried out in this study, for the evaluated material, a post-polymerization time of 1 h should be suggested to improve the mechanical performance of 3D-printed devices.

Unveiling the consequences of early human saliva contamination on membranes for guided bone regeneration.

AIMS: GBR membranes have various surface properties designed to elicit positive responses in regenerative clinical procedures; dental clinicians attempt to employ techniques to prevent the direct interaction of contaminated oral fluids with these biomaterials. However, saliva is uninterruptedly exhibited in oral surgical procedures applying GBR membranes, suggesting a persistent interaction with biomaterials and the surrounding oral tissues. This fundamental study aimed to investigate potential alterations in the physical, chemical, and key biological properties of membranes for guided bone regeneration (GBR) caused by isolated early interaction with human saliva. METHODS: A reproducible step-by-step protocol for collecting and interacting human saliva with membranes was developed. Subsequently, membranes were evaluated for their physicochemical properties, protein quantification, DNA, and 16S rRNA levels viability of two different cell lines at 1 and 7 days, and ALP activity. Non-interacted membranes and pure saliva of donors were applied as controls. RESULTS: Qualitative morphological alterations were noticed; DNA extraction and 16S quantification revealed significantly higher values. Furthermore, the viability of HGF-1 and MC3T3-E1 cells was significantly (p < .05) reduced following saliva interaction with biodegradable membranes. Saliva contamination did not prejudice PTFE membranes significantly in any biological assay. CONCLUSIONS: These outcomes demonstrated a susceptible response of biodegradable membranes to isolated early human saliva interaction, suggesting impairment of structural morphology, reduced viability to HGF-1 and MC3T3-E1, and higher absorption/adherence of DNA/16S rRNA. As a result, clinical oral procedures may need corresponding refinements.

Physical and structural characterization of bis-acryl composite resin.

During the preparation of fixed prosthesis (including individual bridges and crowns) it is important to select the materials that have the best features and properties to predict a successful clinical treatment. The objective of this study was to determine if the chemical and structural characteristics could cause to increase the fracture resistance, we used four bis-acryl resins Luxatemp, Protemp, Structur and Telio. Three-points bending by Flexural test were performed in ten bars and they were carried out to compare with Anova test. In addition, the bis-acryl resins were analyzed by scanning electron microscopy, to analyze microstructure and morphology and the molecular structure were performed by Infrared Spectroscopy through Attenuated Total Reflectance. A higher flexural strength was found in Luxatemp and Structur with, no significant differences between this study groups. Regarding Protemp and Telio, these study groups showed a lower flexural strength when were compared with Luxatemp and Structur. These results corroborate SEM and ATR analysis because Luxatemp sample showed a regular size particle on the surface and chemically presents a long cross-linkage polymer chain. The presence of CO3, SiO2 and N-H groups as a fillers particle interacting with OH groups cause a higher flexural strength compared with another groups.

Adhesion of tooth fragment after trauma: effect of adhesion strategy and storage in the rescue box.

This study aims to investigate the impact of storage conditions for crown fragments (specifically, whether they were stored within a tooth rescue box or in tap water) on their adhesion to fractured teeth when subjected to two different adhesive systems (namely, total etch and self etch). Sixty maxillary premolars were sectioned to obtain tooth fragments. These fragments were stored briefly (2 hours) and reattached in the following groups: Group 1 (fragments stored in tooth rescue box and reattached with etch and rinse (E&R) technique), Group 2 (fragments stored in tap water and reattached with E&R technique), Group 3 (fragments stored in tooth rescue box and reattached with self-etch (SE) technique), and Group 4 (fragments stored in tap water and reattached SE technique). After reattachment, the bonded tooth fragments underwent thermal cycling (500 cycles, 5-55 °C) and bond strength testing using a universal testing machine. Two-way Analysis of Variance (ANOVA) and Tukey's tests were used for bond strength comparison (p ≤ 0.05). A two-parameter Weibull distribution was conducted to evaluate the reliability of the storage medium and adhesion modality on bond strength. The results showed that measured shear bond values (MPa ± Standard deviation (SD); arranged in descending order) for each group were: Group 2 (Tap water/E&R = 6.5 ± 2.1), Group 1 (Rescue box/E&R = 6.0 ± 2.5), Group 4 (Tap water/E&R = 5.1 ± 2.8), and Group 3 (Rescue box/SE = 3.6 ± 3.2). Significant differences were found only between Groups 2 and 3 (p = 0.002). In conclusion, storing crown fragments in a tooth rescue box did not significantly affect the shear bond strength of the restored tooth. However, fragments reattached using the self-etch technique showed comparable shear bond strength but a higher rate of adhesive failures compared to the E&R technique.

Impact of CAD/CAM Material Thickness and Translucency on the Polymerization of Dual-Cure Resin Cement in Endocrowns.

The objective of this study is to evaluate the impact of the thickness and translucency of various computer-aided design/computer-aided manufacturing (CAD/CAM) materials on the polymerization of dual-cure resin cement in endocrown restorations. Three commercially available CAD/CAM materials-lithium disilicate glass (e.max CAD), resin composite (CERASMART), and a polymer-infiltrated ceramic network (ENAMIC)-were cut into plates with five different thicknesses (1.5, 3.5, 5.5, 7.5, and 9.5 mm) in both high-translucency (HT) and low-translucency (LT) grades. Panavia V5, a commercial dual-cure resin cement, was polymerized through each plate by light irradiation. Post-polymerization treatment was performed by aging at 37 °C for 24 h under light-shielding conditions. The degree of conversion and Vickers hardness measurements were used to characterize the polymerization of the cement. The findings revealed a significant decrease in both the degree of conversion and Vickers hardness with increasing thickness across all CAD/CAM materials. Notably, while the differences in the degree of conversion and Vickers hardness between the HT and LT grades of each material were significant immediately after photoirradiation, these differences became smaller after post-polymerization treatment. Significant differences were observed between samples with a 1.5 mm thickness (conventional crowns) and those with a 5.5 mm or greater thickness (endocrowns), even after post-polymerization treatment. These results suggest that dual-cure resin cement in endocrown restorations undergoes insufficient polymerization.

Comparative analysis of stress distribution in residual roots with different canal morphologies: evaluating CAD/CAM glass fiber and other post-core materials.

BACKGROUND: The selection of post-core material holds significant importance in endodontically treated teeth, influencing stress distribution in the dental structure after restoration. The use of computer-aided design/computer-aided manufacturing (CAD/CAM) glass fiber post-core possesses a better adaptation for different root canal morphologies, but whether this results in a more favorable stress distribution has not been clearly established. MATERIALS AND METHODS: This study employed finite element analysis to establish three models of post-core crown restoration with normal, oversized, and dumbbell-shaped root canals. The three models were restored using three different materials: CAD/CAM glass fiber post-core (CGF), prefabricated glass fiber post and resin core (PGF), and cobalt-chromium integrated metal post-core (Co-Cr), followed by zirconia crown restoration. A static load was applied and the maximum equivalent von Mises stress, maximum principal stress, stress distribution plots, and the peak of maximum displacement were calculated for dentin, post-core, crown, and the cement acting as the interface between the post-core and the dentin. RESULTS: In dentin of three different root canal morphology, it was observed that PGF exhibited the lowest von Mises stresses, while Co-Cr exhibited the highest ones under a static load. CGF showed similar stress distribution to that of Co-Cr, but the stresses were more homogeneous and concentrated apically. In oversized and dumbbell-shaped root canal remnants, the equivalent von Mises stress in the cement layer using CGF was significantly lower than that of PGF. CONCLUSIONS: In oversized root canals and dumbbell-shaped root canals, CGF has shown good performance for restoration of endodontically treated teeth. CLINICAL RELEVANCE: This study provides a theoretical basis for clinicians to select post-core materials for residual roots with different root canal morphologies and should help to reduce the occurrence of complications such as root fracture and post-core debonding.

Comparison of coronal sealing of flowable composite, resin-modified glass ionomer, and mineral trioxide aggregate in endodontically treated teeth: An in-vitro study.

Background: Coronal seal is one of the essential factors that affects the success of endodontic treatment and reinforces the apical seal. The intra-orifice barrier is an efficient alternative approach to decrease coronal leakage in endodontically treated teeth and various materials have been used for this purpose. This study aimed to compare the coronal sealing of flowable composite, resin-modified glass ionomer (RMGI), and mineral trioxide aggregate (MTA) in endodontically treated teeth. Materials and Methods: In this in vitro study, 35 single-canal canine teeth were divided into five groups, including flowable composite, RMGI, MTA, positive control, and negative control groups. The teeth were filled with restorative materials according to the factory's instructions. Afterward, the samples were immersed in 2% methylene blue dye solution for 1 week at 37°C and 100% humidity condition. Finally, the teeth were sectioned longitudinally and dye penetration was measured using a stereomicroscope with ×10. Data were analyzed with Kolmogorov-Smirnov and Kruskal-Wallis tests (α = 0.05). Results: The positive control group showed the highest amount of dye penetration compared to other groups (12.34 ± 0.46). Dye penetration in the MTA group was significantly lower (4.25 ± 0.31) compared to the RMGI group (5.94 ± 0.24) (P = 0.02). Moreover, while the dye penetration in the MTA group was lower than in the flowable composite group (5.65 ± 0.26), the difference was not statistically significant (P = 0.12). Conclusion: MTA reduces the coronal leakage and provides an acceptable coronal seal in endodontically treated teeth, especially compared to RMGI, and therefore, using MTA as an intra-orifice barrier increases the endodontic treatment success rate.

Preheating and "snow-plow" composite application technique affect double bond conversion but not bond strength to dentine.

OBJECTIVE: To measure degree of conversion (DC) of a flowable composite, microtensile bond strength (MTBS) to dentine in the snow-plow technique with/without preheating and temperature in the preheated composite. MATERIALS AND METHODS: For DC, snow-plow specimens of Filtek Ultimate Flowable (Flow) and Filtek Bulk Fill (Bulk) (3M) were prepared by light-curing composites simultaneously in standardized molds while in control groups light-curing was separate. DC of Flow was measured using micro-Raman spectroscopy. For MTBS, specimens were prepared on dentine of human extracted molars by simultaneous (snow-plow) or separate (control) light-curing. MTBS was measured using a universal testing machine after 24 h and 6 months. Data were analyzed using ANOVA with Tukey's post hoc (α = 0.05). RESULTS: Increased curing time significantly increased DC in snow-plow from 13.4% ± 11.6% (10 s) to 31.8% ± 4.4% (40 s) albeit significantly lower than controls (p < 0.05). Preheated Bulk improved conversion in snow-plow (44.3% ± 1.7%) and control (50.5% ± 2.6%) (p < 0.05). No significant differences occurred in MTBS between groups (p > 0.05). MTBS values ranged between 66.7 ± 8.4 MPa (snow-plow group_21°C_baseline) and 54.1 ± 15.8 MPa (control_21°C_long-term). Temperature in the preheated Bulk dropped to ~38°C after 30 s. CONCLUSIONS: Snow-plow technique, irrespective of preheating, resulted in lower DC of Flow than separate light-curing of composite increments. Snow-plow, irrespective of preheating, resulted in similar initial and long-term MTBS to dentine. CLINICAL SIGNIFICANCE: Clinicians with preference for flowable composite liners in Class II restorations should be aware that the snow-plow technique of simultaneous light-curing of flowable and bulk-fill composite increments affects monomer-to-polymer conversion, albeit no effect on immediate, and long-term bonding to dentine was detected. Preheating sculptable bulk-fill composite improves conversion of the flowable liner in the snow-plow technique but has no detectable effect on bond strength to dentine.

The formation of cariogenic plaque to contemporary adhesive restorative materials: an in vitro study.

The research exploiting the ability of dental materials to induce or prevent secondary caries (SC) development still seems inconclusive. Controlling bacterial adhesion by releasing bacteriostatic ions and improving the surface structure has been suggested to reduce the occurrence of SC. This paper analyses the impact of five distinctively composed dental materials on cariogenic biofilm formation. Forty-five specimens of three composites (CeramX Spectra ST, Admira Fusion, Beautifil II) and two glass-ionomers (Fuji II LC, Caredyne Restore), respectively, were incubated in bacterial suspension composed of Streptococcus mutans, Lactobacillus acidophilus, Streptococcus mitis, Streptococcus sanguinis, and Streptococcus salivarius at pH 7.0 and 5.5. Coverslips were used as a control. Adhered bacteria were collected after 2, 4, 6, 12, 24, and 48 h and analyzed using quantitative polymerase chain reaction (qPCR). Fluoride leakage was measured at each collection. The specimens' surface topography was assessed using interferometry. In the present study, surface roughness seemed to have a partial role in bacterial adhesion and biofilm formation, together with chemical composition of the materials tested. Despite differences in fluoride leakage, biofilm accumulation was similar across materials, but the number of adhered bacteria differed significantly. A release of other ions may also affect adhesion. These variations suggest that certain materials may be more prone to initiating secondary caries.

Navigating the assessment landscape: Dental students' perceptions of extended-matching questions versus single-correct answers.

PURPOSE: The present study aims to evaluate students' perceptions of different types of written assessment within the context of dental materials science and to identify how various learning styles exhibited by dental students, as well as gender and ethnicity, may influence their perceptions of these assessment methods. METHODS: The study was conducted among second-year dental students in a dental materials science class, during which students participated in a mock assessment that included extended matching questions (EMQs) and single correct answer (SCA) questions. An online questionnaire comprising three sections: demographic information, Honey and Mumford's Learning Styles Questionnaire, and 15 closed-ended questionnaire items employing a 5-point Likert scale were administered to assess students' perceptions of the assessment methods. Statistical analyses were conducted using the Kruskal-Wallis test, Mann-Whitney U test, and a post-hoc Bonferroni test. RESULTS: All 70 students participated in the study with the majority being female, Chinese, and activist learners. Median total scores among various learning styles, gender, and ethnicity did not exhibit significant differences. Analysis of individual questionnaire items revealed mixed perceptions regarding EMQs. Reflectors generally held more positive perceptions of EMQs, while theorists showed the lowest total median scores toward EMQs. Most students did not prefer EMQs over SCAs, and some students expressed confusion about EMQs, especially those with a theorist learning style. CONCLUSION: Although students generally showed good perceptions towards these assessment methods, further research is needed to better understand the interplay of learning styles, assessment preferences, and educational outcomes in dental education.

Effect of Immediate Dentin Sealing on the Bonding Performance of Indirect Restorations: A Systematic Review.

The popular immediate dentin sealing (IDS) technique is used to improve the bond strength of indirect restorations. This systematic review assessed whether bond strength is affected by the type of aging conditions, bonding agents, flowable resin composites, impression materials, temporary materials, and/or resin cement used within the IDS procedure. A comprehensive database search of PubMed, Embase, Scopus, Ovid Medline, Web of Sciences, Cochrane Library, Dentistry & Oral Sciences Source, and ProQuest was carried out up to 30 January 2024 without publication year or language limitations. Only in vitro full-texts regarding the effect of IDS on bond strength were included, and the quality of their methods was assessed via a Risk of Bias (RoB) test. In total, 1023 pertinent studies were initially found, and 60 articles were selected for review after screening for the title, abstract, and full texts. IDS application improves the bond strength of indirect restorations to dentin and reduces the negative effects of temporary materials on the bond durability of final indirect restorations. Filled dentin bonding agents or combinations with flowable resin composite are preferred to protect the IDS layer from conditioning procedures.

Evaluation of Antimicrobial Properties, Cell Viability, and Metalloproteinase Activity of Bioceramic Endodontic Materials Used in Vital Pulp Therapy.

This study aimed to evaluate the antimicrobial properties, cell viability, and matrix metalloproteinase (MMP) inhibition capacity of several endodontic materials aimed at vital pulp therapy: Pro Root MTA®, EndoSequence®, Biodentine®, MTA Angelus®, TheraCal LC®, and BioC Repair®. The materials were prepared according to the manufacturer's instructions. Antimicrobial tests were conducted using a microcosm biofilm model, cell viability was assessed using murine fibroblasts (L929), and MMP activity was analyzed through electrophoresis. The results showed that BioC Repair®, Biodentine®, and EndoSequence® exhibited similar antimicrobial properties, while MTA Angelus® and ProRoot MTA® had inferior results but were comparable to each other. In terms of cell viability, no significant differences were observed among the materials. EndoSequence® demonstrated the highest MMP inhibition capacity. In conclusion, BioC Repair®, Biodentine®, EndoSequence®, and TheraCal® showed better antimicrobial properties among the tested materials. The materials did not exhibit significant differences in terms of cytotoxicity. However, EndoSequence® displayed superior MMP inhibition capacity.

The Role of an Endodontist in Victim Identification: A Narrative Review on Forensic Endodontics.

This narrative review highlights the role of endodontists and the significance of various dental tools in forensic dentistry. An online search was conducted in peer-reviewed journals, including MEDLINE (Ovid), PubMed, Web of Science, Scopus, and Google Scholar databases, to retrieve studies regarding "the role of an endodontist in victim identification using different tools". The searches used controlled vocabulary and free-text terms. Articles written in English and published from 1923 to 2023 were selected. An essential stage in forensic dentistry is dental identification of the dead person and is regarded as an initial step for both judicial and humanitarian purposes if fingerprint records are missing or the remains have undergone significant changes. Endodontists should be aware of all available dental tools that aid in identification. The four fundamental tools for identification are dental radiographs, hard and soft dental structures, and dental materials. Dental radiographs provide a substantial nondestructive record for estimating age and sex. Moreover, maxillofacial hard and soft structures provide important tools for individual identification as they are considered the strongest structures in the human body and can withstand severe chemical and temperature changes. In addition, endodontic and restorative materials can be identified under different conditions and serve as excellent forensic identification measures.

A Randomised Controlled Trial of Postoperative Sensitivity after Class II Restoration with Bulk-Fill vs Conventional Composites.

AIM: Insufficient evidence is available in quantifying the retention between the simplified and conventional non-balanced dentures. The aim of the study was to quantify, compare the maxillary denture retention and patient satisfaction between conventional and simplified removable non-balanced complete dentures. METHOD: The randomized clinical trial recruited 44 patients (n=22) with definitive criteria. Simplified and conventional non-balanced complete dentures were fabricated for the intervention groups. The denture retention of maxillary complete denture was assessed with dynamometer and patient satisfaction with visual analogue scale. The mean retention of maxillary denture and satisfaction were recorded at 0-,3-, and 6 - month interval. The data were statistically analyzed. (α=.05). RESULTS: The mean ±SD of retention for conventional denture at 0, 3, and 6 months by dynamometer ranged from 121.73 ± 1.64 N to 120.55 ± 1.57 N and 110.77 ±1.45N to 109.59±1.97 N for simplified denture. The mean ±SD of visual analogue score varied between 9.45±0.35 to 7.19± 0.69 for conventional dentures and 8.00 ±1.39 to 6.81±0.82 for simplified dentures. The repeated ANOVA, t-test and post-hoc Bonferroni revealed statistically significant differences between the two types of denture. (P⟨.05) Conclusion: Numerical retention and satisfaction were higher in conventional non-balanced denture than simplified denture.

Influence of pH levels and beverage exposure on force decay and color stability of orthodontic elastomeric chains: An experimental study.

Aim of study: To assess the impact of pH level on force decay and color stability of orthodontic elastomeric chains (EOC) after exposure to commonly used beverages. Materials and methods: A total of 120 chain cuts were prepared from 2 different manufacturers (GC Orthodontics Europe GmbH, Breckerfeld, Germany, and FORESTADENT® - Bernhard Foerster GmbH, Pforzheim, Germany). According to the distance between loops, two types of chains were selected from each manufacturer: short and medium ones. Chains were immersed into 10 commonly used beverages with different pH values. After 7 days, force degradation was evaluated with the universal machine for mechanical testing (Model 4411; Instron, Canton, USA) and color change using a VITA Easyshade® digital spectrophotometer. Kruskal-Wallis with post-hoc Dunn's test for intergroup comparison and Wilcoxon rank test for intragroup comparison. Results: Initial force varied among EOC brands, with GC short chains having the highest force and Forestadent medium chains the lowest. The most pronounced force decay occurred within 24 h, notably affecting Forestadent short chains the most, followed by Forestadent medium, GC short, and GC medium chains. Despite a higher force drop rate over seven days, short EOCs maintained higher forces than medium EOCs. GC EOCs consistently maintained higher forces after seven days compared to Forestadent EOCs. After the immersion of EOC in different solutions for 24 h, only Evian water, Soy milk, and Coconut water did not change color. After 7 days, the greatest color change was recorded in coffee. Conclusion: There is no correlation between pH value and force decay of polyurethane chains. Short chains showed more constant force delivery and greater value of remaining force in comparison to medium ones. Color stability was mostly affected by coffee, followed by matcha tea, soy milk, and apple juice.